The footsteps of time rush, and the bell of the New Year is about to ring. At this beautiful moment of bidding farewell to the old and welcoming the new, we are filled with gratitude and anticipation, welcoming the hopeful year of 2025.

Looking back on the past year, we have felt the fruitful results brought by hard work and perseverance, and we deeply understand that every growth and progress cannot be achieved without your support and trust. Whether it is the customer partners who walk through storms or the colleagues who work together, it is precisely because of everyone's joint efforts that we can rise against the wind in challenges and stand out in opportunities.

The arrival of the New Year is not only a change of time, but also a brand new starting point. Standing at the threshold of 2025, we are full of confidence and hope for the future. This year, we will continue to adhere to the core concept of "innovation, service, and quality", providing customers with more outstanding products and solutions; This year, we also look forward to writing even more brilliant chapters with you in the new journey.

On this festive occasion, we sincerely send our sincerest New Year's wishes to you and your family:
Wishing you a happy and healthy New Year!
May your career soar and thrive!
May your life be filled with laughter, peace, and joy!

In the new year, let us continue to work hand in hand, writing dreams with struggle, igniting hope with passion, and jointly creating a future full of miracles and wonders.
Finally, thank you again for your support and companionship over the past year! Let us look forward to the arrival of 2025 with great anticipation!
Happy New Year! Happy New Year!

A crane refers to a multi action lifting machinery that vertically lifts and horizontally transports

heavy objects within a certain range. Also known as overhead crane, aerial crane, or crane.

The working characteristics of some lifting equipment are intermittent movements, that is, the

corresponding mechanisms for picking up, transporting, unloading and other actions in a

working cycle work alternately. The development and use of cranes in the market are becoming

increasingly widespread. Due to the lack of support legs for lifting and frequent accidents during

lifting, the speed of travel is also faster than that of crawler cranes (crawler cranes); Stable

operation, large lifting capacity, capable of lifting and walking within a specific range, but must

ensure that the road is flat and solid, the tire pressure meets the requirements, and the lifting

distance from the ground must not exceed 50CM; Long distance walking with load is prohibited.

To ensure work safety, lifting operations without using supporting legs are generally prohibited.

The types of steel wire ropes used for cranes include phosphating coated steel wire ropes,

galvanized steel wire ropes, and smooth steel wire ropes.

When use crane, you may need a good Crane spare part to make your machine work well.

Allen Bradley MicroLogix 1400 Controller766-L32BWAA will suit perfectly with your machine

and help you work efficiently.

Vivi (sh_plc@163.com). here for your RFQ, since Mid-Year Sales is ongoing, good price now!!!!!

AUTOMATIC BOTTLE WASHER is a standard and automated cleaning equipment that can auto-

matically clean and dry glassware. Its appearance has improved cleaning efficiency and

quality, reduced labor costs, and is one of the common equipment in fields such as laboratories

pharmaceutical factories, and food processing.

Working principle

AUTOMATIC BOTTLE WASHER mainly consists of a cleaning device and a drying device. It

adopts high-pressure spray cleaning method to put the bottle into the equipment. In the

cleaning device, the bottle will be subjected to the combined action of cleaning agent and

water flow to clean the dirt and residue inside the bottle. Finally, the bottle is dried by

circulating hot air to make it dry and tidy.

AUTOMATIC BOTTLE WASHER has the following advantages and characteristics com-

pared to manual cleaning:

Standardization: AUTOMATIC BOTTLE WASHER can achieve fully automated standard cleaning

of bottles, with cleaning speed and efficiency far higher than manual cleaning.

Safety: AUTOMATIC BOTTLE WASHER does not require personnel intervention during the clea-

ning process, and is carried out in a closed chamber to ensure its safety.

Reliability: AUTOMATIC BOTTLE WASHER is equipped with advanced control system and fault

detection system, which can ensure the stability and reliability of the equipment.

Economy: AUTOMATIC BOTTLE WASHER can save a lot of labor and time costs, improve

production efficiency and quality. Install Siemens 6ES72324HD320X80 Analog output module,

since it`s very durable, so apparently it must be economical.

Customizability: AUTOMATIC BOTTLE WASHER can be customized according to different needs,

adapting to bottles of different specifications, shapes, and materials for cleaning

Have interest in above parts? get in touch with Vivi (sh_plc@163.com). 

On October 15, 2024, the 136th Canton Fair was grandly opened, and today, the second phase of the Canton Fair is about to conclude. As the world's largest and oldest comprehensive international trade event, the Canton Fair has always been an important platform for China's opening-up and international trade.

Technological innovation is an important driving force for promoting economic development. This year's Canton Fair fully showcases technological innovation achievements and leads future development trends.

Intelligent manufacturing is one of the highlights of this year's Canton Fair, with many exhibition areas showcasing the latest intelligent manufacturing equipment and solutions, such as automated production lines, industrial robots, IoT technology, etc., providing new ideas for the transformation and upgrading of the manufacturing industry.

The Canton Fair is an excellent opportunity to showcase the strength of enterprises and expand into international markets. New trends such as digital transformation, green environmental protection, technological innovation, diversified markets, and brand enhancement bring new opportunities and challenges to participating companies. We have seen many companies with a spirit of research showcasing their latest scientific research achievements and innovative products, helping them grasp the forefront of technology and enhance their competitiveness. SH Automation has also learned the corporate spirit of "openness, innovation, and sharing" from these enterprises, and hopes to have the opportunity to strengthen cooperation with such enterprises.

The Canton Fair will conclude all activities on November 4th. We sincerely wish all enterprises to shine and achieve fruitful results in the coming time through sufficient preparation and meticulous arrangements.

The National Day of the People's Republic of China, also known as National Day, National Day, China National Day, or National Day Golden Week.

The Central People's Government announced that starting from 1950, October 1st of each year will be the day when the People's Republic of China is declared, which is also known as National Day.

Customs of China's National Day

1. Street lights and decorations

During the National Day holiday, lanterns or banners are hung everywhere, and slogans such as "Celebrating National Day" are used to celebrate the holiday; On the square, there are potted plants and balloons with slogans and words, welcoming the National Day with a joyful atmosphere.

2. National Day holiday

In 1999, China revised and released the "National Holiday and Memorial Day Holiday Measures", which combined the National Day holiday with adjacent Saturdays and Sundays into a 7-day National Day holiday, known as the "National Day Golden Week". Through the holiday, the people can experience the joy of National Day together.

3. Free highways

With the increasing improvement of people's living standards, private cars have become increasingly popular, and people usually take advantage of the 7-day National Day holiday to visit the beautiful mountains and rivers of our country. Therefore, since 2012, private cars have been allowed free access to highways during the National Day holiday.

4. National Day Parade

There have been 14 National Day military parades since the founding of the country. In addition to the military parade at the founding ceremony in 1949, the most impressive is the three National Day military parades in 1984, 1999 and 2009. Through the National Day military parade, we can not only celebrate the National Day and promote our national prestige, but also show the world our strong national defense force, making the people of the country feel a strong sense of pride.

5. Flag raising at Tiananmen Square

Every National Day, going to Tiananmen Square to see the national flag raised is a dream in the hearts of countless people. Therefore, people who take advantage of the National Day holiday to visit Beijing usually rush to Tiananmen Square early to watch the soldiers of the flag raising class raise the flag, expressing their immense love for the motherland. Watching the five-star red flag slowly rise, the excitement in their hearts is indescribable.

6. National Day Celebration

Before and after National Day, various enterprises and institutions will organize employees to hold National Day celebrations and promote corporate culture, using artistic performances to express the joy of National Day.

Hope everyone likes the above content. Our company will also have a seven days holiday from October 1st to 7th. During the holiday period, if you need to purchase products, please send us an email. (Vivi (sh_plc@163.com).)We will check our emails once or twice a day to answer your questions. Thank you for your support

Bearing mounting should be based on the bearing structure, size and bearing parts with the nature of the determination, the pressure should be added directly to the tightly fitted to the end of the ring, shall not be passed through the rolling body of the pressure, bearing mounting is generally used inductive heating method: 

1.Heating assembly

By heating the bearing or bearing housing, the use of thermal expansion will change the tight fit into a loose fit installation method. It is a commonly used and labour-saving mounting method. This method is applicable to the installation of bearings, hot assembly before the bearing on the induction heater heated to below 120 degrees, removed as soon as possible to install the shaft, in order to prevent the cooling of the inner ring end face and the shoulder of the shaft fit is not tight, the bearing can be cooled and then axial tightening. Bearing outer ring and light metal bearing seat tight fit, the use of heating bearing seat hot installation method,you can avoid the matching surface is scratched.

2. Installation of tapered bore bearings

Tapered hole bearings can be mounted directly on the taper of the journal, or loaded with the tight set and the taper of the unloading sleeve, the degree of fit can be used to measure the amount of bearing radial clearance reduction, therefore, the installation should be measured before the bearing radial clearance, the installation process should be frequently measured clearance to achieve the required amount of clearance reduction until the installation is generally used to install the locking nut can be used to install the method of heating installation.

3. Electromagnetic induction heater according to the characteristics of the bearing assembly targeted research and development of high-performance bearing heater, bearing heated bore thermal expansion, and the spindle to produce interference, to meet the hot set of assembly,this assembly method on the bearing without any damage to ensure that the bearing of the original performance.

Contact with Vivi (sh_plc@163.com) for bearing heater video if interested.

The installation and application of EBM papst fan products are crucial in the VSD motor vibration emergency hopper system. These fans not only effectively dissipate heat and ensure the stability of the motor during long-term operation, but also provide continuous and stable air flow for the system through their optimized ventilation technology, thereby further ensuring the smooth operation of the emergency hopper

Among them, EBM-PAPST W2E142-BB01-01, a 142mm axial fan, can provide an air volume of 330m ³/h. With its compact structure and efficient heat dissipation performance, it ensures that the motor can maintain a stable temperature even in vibration environments.

At the same time, EBMPAPST D2D160-BE02-14 plays an irreplaceable role in situations where stronger heat dissipation is required, with its 700W power and 1195m ³/h high air volume. Its optimized aerodynamic design and low noise characteristics enable this centrifugal fan to provide sufficient heat dissipation capacity in the VSD motor vibration emergency hopper without causing excessive noise interference to the surrounding environment.

It is worth mentioning that SH Automation Company has a significant supply advantage in providing EBM papst fan products. As a professional supplier of industrial automation control equipment, SH Automation Company has a rich inventory of products and can provide customers with brand new and original EBM papst fan products with quality assurance. Welcome to contact Vivi for purchase.

With the rapid development of modern technology, garden maintenance tools are also constantly updated, lithium battery garden tools with its unique advantages, gradually replaced the traditional tools, become the new favourite garden maintenance. So, what are the advantages of lithium battery garden tools?

First, high efficiency and environmental protection, energy saving and emission reduction

Lithium battery garden tools using high-efficiency lithium batteries as a power source, compared with traditional fuel tools, has a higher energy density and longer range. At the same time, lithium battery tools in the use of the process will not produce harmful gas emissions, effectively reducing environmental pollution, in line with the requirements of modern society on environmental protection.

Second, lightweight and durable, convenient operation

Lithium battery garden tools are usually lightweight design, the overall weight is light, easy to carry and operate. In addition, lithium batteries have a long service life and stability, even in harsh environments can maintain good performance, greatly extending the service life of the tool.

Third, easy maintenance, reduce costs

Compared with traditional fuel tools, lithium battery garden tools maintenance costs are lower. Lithium batteries do not need frequent replacement and cleaning, reducing the maintenance time and cost. At the same time, lithium battery tools have fewer parts, maintenance is also more convenient.

Fourth, a variety of functions to meet a variety of needs

Lithium battery garden tools a wide range of types, including LITHIUM ELECTRIC TILING MACHINE, electric saws, electric weeders, BRUSHLESS LITHIUM IRON SHEARS, etc., can meet the needs of different garden maintenance work. These tools are not only powerful, but also simple to operate, suitable for a variety of people to use.

Fifth, intelligent control, improve safety

Modern lithium battery garden tools are often equipped with intelligent control systems that can achieve precise power management, speed control and other functions. These intelligent features can not only improve the efficiency of the use of tools, but also effectively guarantee operational safety, reduce the probability of accidents.

The Spring Festival is a fantastic moment for Chinese families around the world to reunite and welcome the new year together. Gong Xi Fa Cai

2024 Spring Festival Gala is the fusion of tradition and innovation attracts billions of viewers worldwide. Allen Bradley 1769-OB16P Output Module

As the highest rated television program in China, the Spring Festival Gala has been a traditional annual program since its premiere in 1983. The 2023 Spring Festival Gala received a total of 11 billion views on China Mobile's all media channels, making it the most watched TV program in the world. (Siemens 6ES7322-1BH01-0AA0 SIMATIC S7-300 Digital output module)

This year, the evening party showcased a variety of performances ranging from music performances, comedy, traditional arts (such as opera and martial arts) to exciting performances (such as magic and acrobatics). In addition, the evening party also adopted cutting-edge technologies such as Extended Reality (XR) and immersive stage interaction technology to enhance the audience's viewing experience.  (Siemens 6ES73172EK140AB0 CPU)

In the eye-catching performance, the creative New Year custom program shows the richness and diversity of Chinese food culture, implying the bumper harvest in the the Year of the Loong.

Chinese drum dance is another vibrant highlight, with dancers dressed in traditional costumes injecting vitality into the stage with highly rhythmic drumbeats. The choreography of dance combines precision and spontaneity, vividly showcasing this ancient art form in modern celebrations.

For the first time, the broadcasting hall has adopted an immersive stage interaction system equipped with a free angle ultra high definition camera. This system can capture the actions of actors from different angles and preserve the exciting moments of the performance. By utilizing artificial intelligence and augmented reality technology for real-time rendering, it creates a visual experience that integrates actors and scenes.

Individuals from different backgrounds become the protagonists of the evening party. From pastry chefs and retired technicians to police officers and athletes, people from different professions shared their stories in the opening short film "Our Spring Festival Gala", igniting people's hope for a better future.

In order to demonstrate the global influence of the Spring Festival Gala, more than 3000  public screens in 90 cities on six continents around the world conducted a live broadcast of the Gala, allowing people from all over the world to experience the unique charm of Chinese Spring Festival and Chinese culture through singing and laughter.

SH Automation Company Limited is celebrating the Spring Festival and will continue to serve our esteemed customers after the holiday. Thank you very much for your past support.

If you have any needs, please contact me (sh_plc@163.com) and I will serve you promptly during the holidays.

1. Immersive technology, including virtual reality and augmented reality.

Virtual reality (VR) and augmented reality (AR) are immersive technologies that support real-time information sharing, helping to train workers, reduce human errors, and improve performance. This means that VR and AR can provide meaningful business value by improving worker safety, increasing productivity, and reducing downtime.(Siemens 6ES72162BD230XB0 SIMATIC S7-200 CPU 226 Compact unit)

Especially with augmented reality technology, industrial enterprises can benefit greatly by providing remote collaboration and other measures to return to work, helping to achieve remote assistance and other functions, enhancing work guidance and three-dimensional training. In addition, AR also helps to implement longer-term future work strategies to narrow skill gaps and drive gradual improvement. B&R X20A02632 analog output module

2. edge computing and cloud computing sometimes play complementary roles.

Edge computing system supports real-time collection, analysis, processing and storage of data at or near the collection site. It is very suitable for personnel without on-site IT expertise,and most edge platforms can run indefinitely without professional on-site or remote IT support.

Automatically capturing OT data context at the edge helps to obtain high-quality and actionable insights from a large amount of factory workshop data. The high-speed up and down culture of edge data helps achieve excellent IT/OT integration. It achieves this by maintaining data integrity and integrating it into a flexible and universal information model. It helps data scientists and data engineers collaborate better to develop enterprise level insights.(Allen Bradley 1756DHR10 communication module )

The demand for real-time data processing and low latency communication in industrial environment has promoted the development of edge computing. At the same time, cloud based solutions reduce costs and simplify remote data access. Therefore, sometimes manufacturers will integrate edge computing and cloud computing at the same time.

Industrial equipments is essential in industrial automation factory, SH Automation Company

Limited especial in supplying it, send RFQ to Vivi is there`s a need. sh_plc@163.com